GE Industrial Solutions AF-300 P11_G11 Ethernet Interface - Manual (Page 14)

Installation and Configuration 8
Installation and Configuration
Module Overview
A B C
1
2
3
Figure Description
A PE
Connector
B RJ45 Ethernet connector
C Network address switch
1-3 LED indicators
Network Connection
Connect the module to a 10 or 100 Mbps Ethernet network.
LED 1 lit green when the module detects link, the LED will flash when the module is receiving/transmitting
data on the network.
Default, auto negotiation will be used for speed and duplex. If speed and duplex settings need to be
configured manually, i.e., no link is established, see the bus configuration parameters.