Net Optics Multi-Station Power Supply - Manual (Page 6)

Multi-Station Power Supply
2
General Description
The AC version of the product accepts power from two AC line sources . The
unit can operate from either one or both AC power sources . The power inputs
are “universal,” accepting 85-264 VAC, 47-63 Hz .
The DC version of the product accepts power from two DC sources . The unit
can operate from either one or both DC power sources . The input voltages
can be from -32 to -72VDC amd is compatible with most telecommunications
equipment rooms .
For both AC and DC models, the unit delivers a nominal 12VDC output on
24 leads terminated with barrel connectors . It is designed to be used with the
following Net Optics products (Taps):
• TP-CU 10/100BaseT Tap
• TP-CU3 10/100/1000BaseT Tap
• PA-CU 10/100BaseT Port Aggregator Tap
• PA-CU-AR 10/100BaseT Port Aggregator Tap, AR
• PAD-CU 10/100BaseT Dual Port Aggregator Tap
• PAD4-CU-AR 10/100BaseT Dual Port Aggregator Tap, AR
• CVT-CU/SX GigaBit TX to SX Tap
• CVT-TX/LX GigaBit TX to LX Tap
• CVT-SX/TX GigaBit SX to TX Tap
• CVT-LX/TX GigaBit LX to TX Tap
• PAD-SX4 GigaBit SX Dual Port Aggregator Tap, 60:40
• PAD-SX5 GigaBit SX Dual Port Aggregator Tap, 50:50
• PAD-GCU GigaBit Copper Dual Port Aggregator Tap
What is In the Box
Carefully unpack the Multi-Station Power Supply and other accessories . The
product is delivered with the following:
• (1) Multi-Station Power Supply
• (2) Power cords (AC model only)
• (2) Power supply clips (AC model only)
• (1) Installation Guide for Multi-Station Power Supply (this manual)
• Extended Warranty if purchased
Check the packing slip against parts received . If any component is missing
or damaged, contact Net Optics Customer Service immediately at +1 (408)
737-7777 .