Asus ESC2000 G2 - Manual (Page 24)

Chapter 2: Hardware setup 2-4
2.2 Motherboard overview
The barebone server comes with the Z9PE-D8 WS motherboard already installed. The
motherboard is secured to the chassis by ten (10) screws as indicated by the circles in the
illustration below.
Refer to Chapter 3: Motherboard Information for detailed information on the motherboard.
Ensure to unplug the power cord before installing or removing any motherboard component
or connection. Failure to do so can cause you physical injury and damage the motherboard
components.
Place this side towards
the rear of the chassis