Asus ESC2000 G2 - Manual (Page 57)

ASUS ESC2000 G2 3-9
3.4 Onboard LEDs
1. Standby Power LEDs
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
The Standby Power LEDs will light up once the system is connected to a power source
Z9PE-D8 WS Onboard LED
2. DIMM Error LED (ERR_DIMM)
These LEDs light up to indicate an error in its nearby DIMM.
Enabled only with ASMB6-i KVM on-board.