Asus ESC2000 G2 User Manual
Page 68
Chapter 3: Motherboard information
3-20
4.
EATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1/EATX12V2)
These connectors are for an EATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
DO NOT forget to connect the 24+8+8-pin power plugs; otherwise, the system will not
boot up.
•
Use of a PSU with a higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
•
This motherboard supports EATX2.0 PSU or later version.
•
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system.