Asus ESC2000 G2 - Manual (Page 51)

ASUS ESC2000 G2 3-3
Layout contents
Jumpers Page
1. Clear RTC RAM (CLRTC1) 3-5
2. VGA Controller setting (DIAG_VIEW1) 3-6
3. SMBUS connection setting (TESLA_M_SW) 3-6
4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_
SEL1)
3-7
5. ME firmware force recovery setting (3-pin ME_RCVR1) 3-7
Internal connectors Page
1. Hard disk activity LED connector (4-pin HDLED1) 3-21
2. USB connectors (10-1 pin USB78, USB910; A-type USB 12/11) 3-22
3. USB connectors (USB3_34) 3-22
4. CPU, front and rear fan connectors (4-pin CPU_FAN1-2,
FRNT_FAN1-4, REAR_FAN1-2)
3-21
5. Power supply SMBus Connector (PSUSMB1) 3-23
6. Serial port connectors (10-1 pin COM1/COM2) 3-23
7. Serial ATA 6.0/3.0 Gb/s connectors (7-pin SATA6G_1-2 [blue];
7-pin SATA3G_3-6 [black])
3-19
8. Marvell Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2/
E3/E4 [gray])
3-18
9. Serial ATA SCU connectors (7-pin SATA_SCU1-4 [black]) 3-19
10. EATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1/
EATX12V2)
3-20
11. System panel connector (20-1 pin PANEL1) 3-24
12. Auxiliary panel connector (20-2 pin AUX_PANEL1) 3-25
13. Digital audio connector (4-1 pin SPDIF_OUT) 3-26
14. IEEE 1394a port connectors (10-1 pin IE1394_1/2) 3-26
15. VGA connector (VGA_HDR1) 3-27
16. Front panel audio connector (10-1 pin AAFP) 3-27
17. ASMB6 header (ASMB6) 3-28