Asus RS160-E5 - Manual (Page 23)

2-5 ASUS RS160-E5
1. Position the cover on top of the
chassis with the thumbscrews on
the rear, and leaving a gap of about
half an inch from the front panel.
3. Slide the cover toward the front until it snaps in place.
4. Tighten the thumbscrews on the rear to secure the cover.
2. Make sure that the side markings
on the cover (two on each side)
are aligned to the grooves on the
chassis.
Grooves
Side markings
Thumbscrews
2.1.3 Installing the top cover