Asus RS160-E5 - Manual (Page 36)

Chapter 2: Hardware setup 2-18
2.5.2 Replacing the riser card (optional)
You may replace the default riser card with the optional PCI Express x16 riser card
(x16 link).
To replace the default riser card:
1. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x16 slot on the
motherboard.
2. Locate the two screws on the riser
card bracket, then remove the
screws from the bracket.
4. Secure the optional riser card to the
riser card bracket with two screws.
3. Take out the optional riser card
from its package and locate the two
screw holes on the card.