Asus ESC4000/IB - Manual (Page 37)

2-15 ASUS ESC4000 Series
2.7 SATAII/SAS backplane cabling
Connects a 8-pin plug
from power supply
Connects to the Intel ® ICH10R SATA connectors on the motherboard
SGPIO2/3: Connects
to the SGPIO1/2
connector on the
ASUS PIKE Riser
Card to support PIKE
SAS RAID SGPIO
function
SGPIO1: Connects to the SGPIO1 connector on the
motherboard to support ICH10R SATA SGPIO function
SGPIO_SEL: Set to pin 1-2 to enable onboard
ICH10R SATA SGPIO function (default). Set
to pin 2-3 to enable optional PIKE SAS RAID
SGPIO function
X
A_SDIN A_SDOUT GND
X
A_SLOAD
A_SCLK
SGPIO2/3 pin definition
J1: Connects to the
power connector of
the slim-type optical
drive