Asus ESC4000/IB User Manual
Page 48
Advertising
![background image](/manuals/297899/48/background.png)
Chapter 2: Hardware setup
2-26
6. Thread the white end of the 8-pin
power cable through the GPU
computing module bracket.
7. Align and insert the golden fingers
of the GPU computing module into
the card slot on the bracket. Ensure
the card is completely seated on
the slot.
8. Secure the rear end of the GPU
computing module to the bracket
with two screws.
5. From inside the airduct, secure
the airduct to the GPU computing
module with 3 black screws.
Advertising
This manual is related to the following products: