Asus ESC4000/IB - Manual (Page 88)

5-18 Chapter 5: BIOS setup
CSI Frequency [Auto]
Allows you to set the CSI frequency.
Configuration options: [Auto] [4.800GT] [5.866GT] [6.400GT]
CSI Isochronous [Disabled]
Configuration options: [Disabled] [Enabled]
CSI L1 [Disabled]
Configuration options: [Disabled] [Enabled]
CSI Power Optimizatin Policy [Static]
Configuration options: [Adaptive] [Static] [Bypass]
CSI RTID [Default]
Configuration options: [Defalut] [32_16_40]
Memory Frequency [Auto]
You may allow the system to detect DDR3 memory frequency via SPD or designate
a specific frequency.
Configuration options: [Auto] [Force DDR-800] [Force DDR-1066]
[Force DDR-1333]
Memory Mode [Independent]
Allows you to set Memory channel mode.
Configuration options: [Independent] [Channel Mirroring] [Lockstep] [Sparing]
Memory ECC Function [Enabled]
Allows you to enable or disable the memory ECC function.
Configuration options: [Disabled] [Enabled]
Double Rate Refresh [Auto]
Configuration options: [Disabled] [Auto]
Demand Scrubbing [Enabled]
Configuration options: [Disabled] [Enabled]
Patrol Scrubbing [Disabled]
Configuration options: [Disabled] [Enabled]
NUMA AWare [Auto]
Configuration options: [Disabled] [Auto]