Asus P5CR-L(S) - Manual (Page 110)

5 - 8 5 - 8 5 - 8 5 - 8 5 - 8 C h a p t e r 5 : D C h a p t e r 5 : D C h a p t e r 5 : D C h a p t e r 5 : D C h a p t e r 5 : Dr i v e r i n s t a l l a t i o n r i v e r i n s t a l l a t i o n r i v e r i n s t a l l a t i o n r i v e r i n s t a l l a t i o n r i v e r i n s t a l l a t i o n
5.2 RAID driver installation
5.2.1 5.2.1 5.2.1 5.2.1 5.2.1 Creating a RAID driver disk Creating a RAID driver disk Creating a RAID driver disk Creating a RAID driver disk Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows ®
2000/XP operating system on a hard disk drive that is included in a RAID
set. You can create a RAID driver disk in DOS (using FreeDOS from the
support CD) or in Windows
® environment.
D O S D O S D O S D O S D O S
To create a RAID driver disk in DOS environment:
1. Place the motherboard support CD in the optical drive.
2. Restart the computer, then enter the BIOS Setup.
3. Set the optical drive as the first boot priority to boot from the
support CD. Save your changes, then exit the BIOS Setup.
4. Restart the computer. The following screen appears during POST.
6. Press any key to continue. The RAID drivers are copied to the floppy
disk.
7. Eject the floppy disk, then write-protect it to prevent computer virus
infection.
8. Press any key to continue.
5. Place a blank, high-density floppy disk to the floppy disk drive, then
press <2>. The following message displays on screen.
1) FreeDOS command prompt
2) Create Intel Application Accelerator for Windows driver
Please choose 1 ~ 2:_
Warning!!
Bootable CD will delete all data in floppy
Press a key to continue._