Asus P5CR-L(S) - Manual (Page 83)

A S U S P 5 C R - L ( S ) A S U S P 5 C R - L ( S ) A S U S P 5 C R - L ( S ) A S U S P 5 C R - L ( S ) A S U S P 5 C R - L ( S ) 4 - 2 1 4 - 2 1 4 - 2 1 4 - 2 1 4 - 2 1
4.4.2 4.4.2 4.4.2 4.4.2 4.4.2 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Configure advanced CPU Settings
Manufacturer : Intel
Brand String : Genuine Intel (R) CPU 3.20GHz
Frequency
: 3200 MHz
FSB Speed : 800 MHz
Cache L1 : 16 KB
Cache L2 : 1024 KB
Cache L3 : 0 KB
Ratio Status: Unlocked
Ratio Actual Value : 16
Ratio CMOS Setting:
[ 8]
VID CMOS Setting: [ 62]
Microcode Updation: [Enabled]
Max CPUID Value Limit: [Disabled]
Execute Disable Bit [Disabled]
Enhanced C1 Control [Auto]
CPU Internal Thermal Control [Auto]
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
You can only adjust the R a t i o C M O S R a t i o C M O S R a t i o C M O S R a t i o C M O S R a t i o C M O S and the V I D C M O S V I D C M O S V I D C M O S V I D C M O S V I D C M O S setting if
you installed an unlocked CPU. Refer to the CPU documentation for
details.
Ratio CMOS Setting [ 8] Ratio CMOS Setting [ 8] Ratio CMOS Setting [ 8] Ratio CMOS Setting [ 8] Ratio CMOS Setting [ 8]
Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by BIOS. Use the
<+> or <-> keys to adjust the values.
VID CMOS Setting [ 62] VID CMOS Setting [ 62] VID CMOS Setting [ 62] VID CMOS Setting [ 62] VID CMOS Setting [ 62]
Allows you to set the VID CMOS setting at which the processor is to run.
The default value of this item is auto-detected by BIOS. Use the < + >
< + > < + > < + > < + > or
< - > < - > < - > < - > < - > keys to adjust the values.
Hyper Threading Technology [Enabled]
Intel(R) Speedstep Technology [Automatic]
Microcode Updation [Enabled] Microcode Updation [Enabled] Microcode Updation [Enabled] Microcode Updation [Enabled] Microcode Updation [Enabled]
Enables or disables microcode updation.
Configuration options: [Disabled] [Enabled]