Asus RS100-E6/PI2 - Manual (Page 33)

2-15 ASUS RS100-E6/PI2
2.5 Expansion card
The system comes with a riser card. You need to remove the riser card and the
expansion slot bracket if you want to install an expansion card.
Ensure to unplug the power cord before installing or removing an expansion
card. Failure to do so may cause severe damage to the motherboard and other
system components!
2.5.1 Installing an expansion card
To install an expansion card:
1. Hold the riser card and pull it up to
detach it from the PCI Express slot
on the motherboard.
3. Remove the screw to release the
metal slot cover from the expansion
card bracket.
2. Remove the screw to release the
expansion card bracket from the
system.