Asus RS100-E6/PI2 - Manual (Page 37)

2-19 ASUS RS100-E6/PI2
2.7 Removable/optional components
You may need to remove previously installed system components when installing
or removing system devices. Or you may need to install the optional components
into the system. This section tells how to remove/install the following components:
1. System fans
2. Optical disk drive (optional)
3. ASUS ASMB4-iKVM (optional)
Ensure that the system is turned off before removing any components.
2.7.1 System fans
To remove the system fan:
1. Unplug the system fan cables from
the FRNT_FAN1 and FRNT_FAN2
connectors on the motherboard.
3. Remove the system fans, and then
set them aside.
2. Locate and remove the two system
fan screws. Keep the screws for
late use.
Follow the previous instructions
in reverse if you want to reinstall
the system fans.