Asus DSBF-DM/SAS - Manual (Page 106)

4-38 Chapter 4: BIOS setup
SETUP prompt [Enabled]
When this item is set to [Enabled], the system displays the message “Press DEL to
run Setup” during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Save any changes to CMOS
exit BIOS Setup and then
reboot system.
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Setup Defaults
4.8 Exit menu
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
Save Changes and Exit
Select this option then press <Enter>, or simply press <F10>, to save your changes
to CMOS before exiting the Setup utility.
When a confirmation window appears:
• select [Yes], then press <Enter> to save and exit.
• select [No], then press <Enter>, or simply press <Esc>, to cancel the command
and return to the Exit menu.
Discard Changes and Exit
Select this option then press <Enter> if you wish to exit the Setup utility without
saving your changes.
When a confirmation window appears:
• select [Yes], then press <Enter> to discard your changes and exit.
• select [No], then press <Enter>, or simply press <Esc>, to cancel the command
and return to the Exit menu.