Asus DSBF-DM/SAS - Manual (Page 50)

2-30 Chapter 2: Hardware information
6. Intel ® 6321ESB SATA port S/W RAID setting (3-pin RAID_SEL1)
(DSBF-DM model only)
This jumper allows you to select the Serial ATA RAID configuration utility to
use when you create disk arrays. Both utilities are supported by the
Intel ® 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI
MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps
on pins 2-3 to use the Intel ® Matrix Storage Manager (IMSM).
®
DSBF-DM Series
DSBF-DM Series RAID setting
RAID_SEL1
1
2 2
3
Intel LSI
(Default)
7. Onboard storage setting (3-pin SAS_EN1) (DSBF-DM/SAS model only)
This jumper allows you to enable or disable the onboard LSI1068 SAS
controller. Set the jumper to pins 1-2 to enable the SAS function (default).
®
DSBF-DM Series
DSBF-DM Series SAS setting
SAS_EN1
1 2 2 3
Enable
(Default)
Disable