Asus DSBF-DM/SAS User Manual
Page 137
Advertising
ASUS DSBF-DM Seriies
5-27
Using the Objects command
To check data consistency using the Objects command:
1. From the Management Menu, select Objects, then select Logical Drive
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then press
<Enter>.
3. Select Check Consistency from the pop-up menu, then press <Enter>.
4. When prompted, use the arrow keys to select Yes from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.
Advertising
This manual is related to the following products: