Asus RS300-E8-RS4 - Manual (Page 113)

ASUS RS300-E8 Series 6-5
6.2.1 Creating a RAID set
To create a RAID set:
1. From the utility main menu, select 1. Create RAID Volume and press
<Enter>.
2. Key in a name for the RAID set from the following screen and press <Enter>.
3. Press the up/down arrow keys to select a RAID Level that you wish to create
then press <Enter>.
4. From the Disks item field, press <Enter> to select the hard disk drives that you
want to include in the RAID set.
5. Use the up/down arrow keys to move the selection bar then press <Space>
to select a disk. A small triangle before the Port number marks the selected
drive. Press <Enter> when you are done.
[ESC]-Previous Menu [ENTER]-Select [ ]Change
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
[ HELP ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Syne:
Create Volume
Enter a unique volume name that has no special characters and is
16 characters or less.
Volume0
RAID0(Strips)
Select Disks
128KB
0.0 GB
N/A
[TAB]-Next
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Non-RAID Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Non-RAID Disk
2 ST3300656SS 397600009846UEDY 279.3GB Non-RAID Disk
3 ST3300656SS GWC50000991756G6 279.3GB Non-RAID Disk
Select 2 disks to create volume.
[ ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done