Asus RS300-E8-RS4 - Manual (Page 65)

ASUS RS300-E8 Series 4-17
16. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1)
These connectors are for the ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
• DO NOT forget to connect the 24-pin and the 8-pin power plugs otherwise
the system will not boot up.
• Use of a power supply unit (PSU) with a higher power output is recommended
when configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• This motherboard supports ATX2.0 PSU or later version.
• Ensure that your PSU can provide at least the minimum power required by
your system.