Asus RS300-E8-RS4 - Manual (Page 54)

Chapter 4: Motherboard information 4-6
4. RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 2–3 to use the Intel ®
Rapid Storage Technology.
5. Platform Enviromental Control Interface Setting (3-pin PECI1)
When an ASMB7-iKVM is installed, set these to pins 2-3 for correct sensor
information of the Platform Environmental Control Interface (PECI). Set to
pins 1-2 if ASMB7-iKVM is not installed.
P9D-C/4L
®
P9D-C Series RAID setting
RAID_SEL1
3ͬͩ Party
(Default)
Intel
1 2 2 3