Asus P6T SE - Manual (Page 109)

ASUS P6T SE 5-3
Chapter 5
5. Connect two independent auxiliary power
sources from the power supply to the two
graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.
5.2.2 Triple CrossFireX installation
1. Prepare three CrossFireX-ready graphics cards.
2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more
than three PCIEX16 slots, refer to its user manual for the locations of the PCIEX16
slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and firmly insert the two CrossFireX
bridge connectors to the goldfingers
on each graphics card. Ensure that the
connectors are firmly in place.
5. Connect three independent auxiliary
power sources from the power supply to
the three graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.