Asus P6T SE - Manual (Page 52)

2-32 Chapter 2: Hardware information
Chapter 2
9. CPU, chassis, and power fan connectors
(4-pin CPU_FAN; 3-pin CHA_FAN1–2; 3-pin PWR_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total
of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of
the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
• Only the CPU_FAN, CHA_FAN 1 and CHA_FAN 2 connectors support the ASUS Q
FAN 2 feature.
• If you install two VGA cards, we recommend that you plug the rear chassis fan cable
to the motherboard connector labeled CHA_FAN1 or CHA_FAN2 for better thermal
environment.