Chapter 2 – Asus P6T SE User Manual

Page 55

Advertising
background image

ASUS P6T SE

2-35

Chapter 2

12. ASUS Q-Connector (system panel)
Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables. Refer to

the following instructions to install the ASUS Q-Connector.

1.

Connect the front panel cables to the ASUS

Q-Connector.

Refer to the labels on the Q-Connector to

know the detailed pin definitions, and then

match them to their respective front panel

cable labels.

The labels on the front panel cables

may vary depending on the chassis

model.

IDE_LED

POWER SW

RESET SW

IDE_LED-

IDE_LED+

PWR

Reset

Ground

Ground

2.

Install the ASUS Q-Connector to the system

panel connector, making sure the orientation

matches the labels on the motherboard.

3.

The front panel functions are now enabled.

The figure shows the Q-Connector is properly

installed on the motherboard.

Advertising