Technical data, Installation – Zanussi ZFC623WAP User Manual

Page 42

Advertising
background image

Problem

Possible cause

Solution

It is too cold inside the freezer.

The temperature is not set correctly.

Set a warmer temperature.

The appliance does not work at

all. Neither cooling nor lighting

works.

Plug is not connected to the mains

socket properly.

Connect the mains plug properly.

Power does not reach the appliance.

Try connecting another electrical de-

vice to the power outlet.

The appliance is not switched on.

Switch on the appliance.

There is no voltage in the mains

socket (try to connect another appli-

ance into it).

Call an electrician.

Customer Service

If your appliance is still not working properly after mak-

ing the above checks, contact the nearest service centre.

To obtain fast service, it is essential that when you ap-

ply for it you specify the model and serial number of

your appliance which can be found either on the guar-

antee certificate or on the rating plate located on the ex-

ternal right side of the appliance.

Replacing the lamp

1. Disconnect the mains plug from the mains socket.

2. Replace the lamp with one of the same power and

specifically designed for household appliances.

(the maximum power is shown on the lamp cover)

3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes on.

Technical data

Volume (gross)

Litre

213

Height

mm 876

Rising Time

hours

28

Volume (net)

Litre

210

Width

mm 806

Energy Consumption

kWh/24h

0,616

Rated Power

Watt

80

Depth

mm 665

Freezing Capacity

kg/24h

14

Voltage

Volts

230

Weight

Kg

39

Climatic Class

SN-T

Further technical information are situated in the rating plate on the external right side of the appliance.

Installation

Positioning

Warning! If you are discarding an old appliance

that has a lock or catch on the lid, you must

ensure that it is made unusable to prevent young

children being trapped inside.

Important! The appliance shall have the plug accessible

after installation.
This appliance can be installed in a dry, well ventilated

indoor (garage or cellar), but for optimum performance

install this appliance at a location where the ambient

42

Advertising