Asus NCCH-DLE - Manual (Page 143)

A S U S N C C H - D L E A S U S N C C H - D L E A S U S N C C H - D L E A S U S N C C H - D L E A S U S N C C H - D L E 5 - 3 1 5 - 3 1 5 - 3 1 5 - 3 1 5 - 3 1
6. After you have created the RAID 0 set, press any key to reboot the
system.
During POST, the FastTrak S150 TX4™ BIOS checks and displays the
disk array information.
7. Once the array is created, use the FDISK utility to format the array as
a single hard drive.
8. After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 0 array as a single drive unit.
During the OS installation, the system prompts you to install third-party
SCSI or RAID driver. Refer to section “2. RAID driver installation” for
details.