Asus NCCH-DLE - Manual (Page 154)

5 - 4 2 5 - 4 2 5 - 4 2 5 - 4 2 5 - 4 2 C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n C h a p t e r 5 : D r i v e r i n s t a l l a t i o n
5. Press <Ctrl> + <Y>.
6. When a dialog box appears, press <I> to create and quick initialize the
RAID set.
7. When prompted, press <Y> to continue.
8. After you have created the RAID set, press any key to reboot the system.
During the boot process, the FastTrak S150 TX4™ BIOS checks and
displays the disk array information.
9. Use the FDISK utility to format the array as a single hard drive.
10. After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID set as a single drive unit.
Using quick initialization erases all data from the existing hard disk
drives. Make sure to backup all important data before using this RAID
configuration mode.