Armasight NRWVULCAN239DA1 Vulcan 2.5-5x Gen 3 Alpha MG Night Vision Riflescope - Manual (Page 15)

15
2.3 STANDARD COMPONENTS
The Vulcan standard components are shown in Figure 2-3 and listed in Table 2-8.
The ITEM NO. column indicates the number used to identify items in Figure 2-3.
1
2
3
4
5 6
FIGURE 2-3. VULCAN STANDARD COMPONENTS
8
7
9
10
11 12
TABLE 2-8. VULCAN STANDARD COMPONENTS
ITEM NO. DESCRIPTION qUANTITY
1 Vulcan Night Vision Riflescope
A night vision device equipped with quick-release mount; can be installed on a Picat-
inny/ Weaver rail. 1
2 Lens Cap
A cap used to protect the lens and to be used when testing the unit in daylight. 1
3 Eye-cup
A rubber cup used to protect the eyepiece as well as provide comfort for the operator. 1
4 Double Lever-Lock quick Release Picatinny Mount
A quick-release mount used to install the Vulcan on a Picatinny/ Weaver rail. 1
5 2X Afocal Lens
Quickly converts the Vulcan into a long-range night vision scope. 1
6 Advanced Wireless Remote Control
Wireless control used to operate the Vulcan in short-time activation mode. Ensures
quick and silent Vulcan activation/ deactivation. Delivered with two CR2016 (3V) bat-
teries installed. 1
7 Picatinny Adaptor for Advanced Wireless Remote Control
An adaptor mounted to the Picatinny rail of a weapon. Allows the Advanced Wireless
Remote Control to be installed on the weapon. 1
8 IR850 Detachable Long Range Infrared Illuminator
Long-range infrared illuminator equipped with a Weaver mount. Should be used when
there is little to no ambient light. 1
9 CR123А Battery
A single lithium battery used to power the Vulcan. A single lithium battery used to
power the IR850. 2