Armasight NRWVULCAN239DA1 Vulcan 2.5-5x Gen 3 Alpha MG Night Vision Riflescope - Manual (Page 23)

23
TABLE 3-1. VULCAN CONTROLS AND INDICATORS
ITEM NO. CONTROL/INDICATOR FUNCTION
1 Pivoted Shutter Closes/ opens the photoreceiver when placed in the highest/ lowest
position.
2 Turn Switch Switches the Vulcan on, when turned from OFF to ON.
NOTE:
Both the ON and STB positions can only be used if the switch is
unlocked. Unlock the switch by pushing down on the spring-
loaded stop (5, Figure 3-13) before turning.
Switches the device to standby mode, when turned from OFF to STB
position (see note above).
Switches the Vulcan off, when turned from ON/ STB to OFF.
3 Spring-loaded Stop Locks the turn switch in the OFF position.
4 Eyepiece Ring Adjusts the diopter. Adjusts for the sharpest view of the scene.
5 Gain Control Knob Adjusts the brightness of the image.
6 Reticle Brightness
Adjustment Knob Adjusts the brightness of the red reticle in the Vulcan’s field of view.
7
8
Elevation Adjustment
Turret
Windage Adjustment
Turret
(closed with a cap) Adjusts the riflescope’s boresight.
- Remote Control Button Activates/ deactivates the Vulcan in standby when pressed/ released.
- Low Battery Indicator FLASHING RETICLE in viewing area indicates a low battery.
The Armasight Vulcan reticle provides a clear aiming point, even when difficult-to-see games or objects
blend into the background. Posts and crosshairs appear in the center section of the field of view, but
occupy a minimal portion of the image, making precise shots on even the smallest targets easy and
accurate.
FIGURE 3-10. VULCAN RETICLE
5 MIlS
10 MIlS