AVSL 174.210 MT-50 - Manual

MT-50 Metal Driver Pedal
174.210UK
Functions
1. LEVEL
– Adjusts the output level
2. FILTER
– Adjusts the high frequency response of the pedal
3. GAIN
– Determines the amount of distortion/overdrive produced
4. Output
– 6.3mm mono jack connector
5. D.C. In – DC jack for optional mains adapter
6. Input – 6.3mm mono jack connector
7. Indicator LED – Shows when effect is on (when it appears dim, replace battery)
8. Pedal Switch
– Turns Effect On/Off
9. Battery housing
– Compartment underneath for 9V battery
Notes on use

Connecting to the Input jack enables the battery, please disconnect when not in use to
preserve the battery

Before connecting to an instrument, ensure amplifier volume is turned down
Specifications
 Input Impedance: 1MΩ

Output Impedance: 10 kΩ

Power Supply: 9Vdc (battery or optional mains adapter) 11mA
© chord 2009
www.chordmusicuk.com