AVSL 175.250 CAB41PK - Manual

CAB41PK
10W BASS AMPLIFIER
User Manual
Layout
1. Bass input 5. Treble control
2. Master volume control 6. Headphones output
3. Bass control 7. Auxiliary input
4. Middle control 8. Power switch
Setting up and operation
 Your CAB41 bass is supplied with a guitar lead with a 6.3mm jack on each end
 Plug one end into the bass jack socket and the other end into the guitar input on the amplifier (1)
 The bass amplifier is supplied with IEC lead(s) for connecting to the mains
 Connect the IEC at the rear of the amplifier and the mains plug to an appropriate mains outlet
 Turn Master volume (2) fully down and set Bass, Middle and Treble controls (3, 4, 5) to the 12 o’clock position
 Switch the power on (8)
 Play the bass with volume and tone controls turned fully up and gradually increase Master volume
 The tone of the bass can be changed by adjusting the Bass, Middle and Treble controls (3, 4, 5)
 A 3.5mm jack Aux input is provided for playing along to a track from an audio player
 Connect a an mp3 player, smart phone or other line level source to the Aux Input and press play
 Use volume controls on the playback device and bass to achieve the best volume balance of both
 If silent practice is preferred, plug headphones in via the other 3.5mm socket, which will mute the speaker
 After use, turn down Master volume and switch off power. Unplug from mains when not in use for long periods
Specifications
Power supply 230Vac, 50Hz (IEC) 18W
Output power 10Wrms
Dimensions 250 x 280 x 125mm
Weight 3.4kg
Errors and omissions excepted.
Copyright© 2013. AVSL Group Ltd.