Xoro HSD 8430 - Manual (Page 62)

12
Engl
ish
BASIC CONNECTIONS
The Scart or Euro AV cable serves as the universal connector for picture, sound and control
signals.
Plug a cable onto the SCART socket at the back of the DVD player and the SCART IN
socket on the rear side of the TV set. Please also refer to your TV sets user manual.
Switch on the TV set and select the Scart input or the respective channel number. For chan-
nel number and input selection please also refer to your TV operating instructions.
Notes :
The Scart interface of this DVD recorder is RGB enable. In RGB mode, the picture quality is
much better than in standard SCART mode. You can activate RGB mode on the video set-
tings page of your DVD recorder, You only can use this mode if it is supported by your TV
set. Otherwise, the use of RGB will result in wrong colour display. please also refer ti your
TV set's user manual.
User can choose the proper video connection according to the TV set jacks and his require-
ment (same as below). Choose below speaker size setting in the setting.
sca rt o u t
Connection to a TV set with SCART jack