Xylem A-C Fire Pump – Vertical Turbine Fire Pump AC8499 - Manual (Page 2)

2
Safety Apparel:
• Insulated work gloves when handling hot bearings or using
bearing heater.
• Heavy work gloves when handling parts with sharp edges,
especially impellers.
• Safety glasses (with side shields) for eye protection, espe-
cially in machine shop areas.
• Steel-toed shoes for foot protection when handling parts,
heavy tools, etc.
• Other personal protective equipment to protect against
hazardous/toxic fluid.
Coupling Guards:
• Never operate a pump without a coupling guard properly
installed.
Flanged Connections:
• Never force piping to make a connection with a pump.
• Use only fasteners of the proper size and proper material.
• Ensure there are no missing fasteners.
• Beware of corroded or loose fasteners.
• Do not operate below minimum rated flow, or with suction/
discharge valves closed.
• Do not open vent or drain valves, or remove plugs while
system is pressurized.
Maintenance Safety:
• Always lock out power.
• Ensure pump is isolated from system and pressure is
relieved before disassembling pump, removing plugs, or
disconnecting piping.
• Use proper lifting and supporting equipment to prevent
serious injury.
• Observe all decontamination procedures.
• Know and follow company safety regulations.
Pump Safety Tips
Note: Observe all cautions and warnings highlighted
in the pump Installation, Operation and Maintenance
Instructions.