Xylem 19 001 251 R3 Floboy VFD Pumping System - Manual (Page 28)

24
Pressing the Menu button from the main screen
provides access to the menu system.
Figure 20: Menu
Access to the main functions of the controller is
available from the menus.
Figure 21: Totals
TOTALS : provides access to the Flow totals
(optional flow meter required) and pump hour
meters.
Figure 22: Pump Control
PUMP CONTROL : Allows access to pump start/stop
parameters for station tuning.
START SETTINGS . Select combo and parameters
to set via buttons at top of screen. Pressure is in
reference to set point. Flow rate is used for Flow
Start systems.
Figure 23: Stop Settings
STOP SETTINGS : Pressure is in reference to set
point, flow rate is used when flow stop is
required/configured.
Figure 24: Pump Control, Combo Selection
F3 allows user to change the combo being
adjusted. Note the combo number being adjusted
is shown in the black box on the right-hand side of
the screen.