Xylem 19 001 251 R3 Floboy VFD Pumping System - Manual (Page 8)

4
ADDITIONAL SAFETY INFORMATION
This pump has been designed for safe and reliable
operation. A pump is a pressure-containing device
with rotating parts that could be hazardous.
Operators and maintenance personnel must
realize this and follow necessary safety measures.
Proper safety procedures must be followed. Xylem
Flowtronex shall not be liable for damage or
delays caused by a failure to observe the
instructions in this manual.
SAFETY APPAREL :
• Wear insulated work gloves when
handling hot bearings or using bearing
heater.
• Wear heavy work gloves when handling
parts with sharp edges, especially
impellers.
• Wear safety glasses (with side shields) for
eye protection, especially in machine shop
areas.
• Wear steel-toed shoes for foot protection
when handling parts, heavy tools, etc.
• Wear other personal protective equipment
to protect against hazardous/toxic fluids.
COUPLING GUARDS :
• Never operate a pump without a coupling
guard properly installed.
• Never force piping to make a connection
with a pump.
• Use only fasteners of the proper size and
material.
• Ensure there are no missing fasteners.
• Beware of corroded or loose fasteners.
OPERATION :
• Do not operate below minimum rated flow,
or with suction/discharge valves closed.
•
Do not open vent or drain valves, or
remove plugs while system is pressurized.
MAINTENANCE SAFETY :
• Always lock out power.
•
Ensure power is isolated from system and
pressure is relieved before disassembling
pump, removing plugs, or disconnecting
piping.
• Use proper lifting and supporting
equipment to prevent serious injury.
• Observe proper decontamination
procedures.
• Know and follow company safety
regulations.
• Never apply heat to remove impeller.
• Observe all cautions and warnings
highlighted in pump instruction manual.