Xylem IM158 R04 Model SMVT - Manual (Page 4)

2 SMVT Installation, Operation and Maintenance Manual
I. Introduction and Safety
Introduction
Description
This manual provides instructions for the Installation, Operation and Maintenance of the
Goulds Water Technology Model SMVT pumps. This manual covers the standard product
plus common options that are available.
Requirement
This manual must be read and understood before installation and start-up. Goulds Water
Technology shall not be liable for physical injury, damage or delays caused by a failure
to observe the instructions for installation, operation and maintenance contained in this
manual.
Content
This instruction manual covers several different pump models that all have similar power
end configurations. Most assembly, disassembly and inspection procedures are the same for
all the pumps. However, where there are differences, they are called out separately within
the manual. The design, materials and workmanship incorporated in the construction of
Goulds Water Technology pumps makes them capable of giving long, trouble free service.
The life and satisfactory service of any mechanical unit, however, is enhanced and extended
by correct application, proper installation, periodic inspection, condition monitoring
and careful maintenance. This instruction manual was prepared to assist operators in
understanding the construction and the correct methods of installing, operating and
maintaining these pumps.
Key Topics
Transportation and Storage
Product Description
Proper Installation
Start up Procedures
Operation Procedures
Routine Maintenance
Pump Overhaul
Trouble Shooting
Identifying Spare or Repair Parts
Introduction and Safety