Xylem IM158 R04 Model SMVT - Manual (Page 9)

SMVT Installation, Operation and Maintenance Manual 7
II. Transportation and Storage
Description
This section describes recommended methods for receiving, storing and handling the pump
prior to physical installation.
Receiving
The pump should be uncrated or unboxed when it is received so that it can be completely
inspected. Carefully check that everything is in good order. Make notes of damaged
or missing items on the receipt and freight bill. File any claims with the transportation
company as soon as possible.
Storage
Short Term: For storage of less than six months, the normal packaging procedures used by
Goulds Water Technology are designed to protect the pump during shipping. After receipt,
store in a covered and dry location.
Long Term: For storage of more than six months, preservative treatment of bearings and
machined surfaces will be required. Rotate the pump and motor shaft several times every
three months. Refer to driver manufacturers for their long term storage procedures. Store in
a covered, dry location.
Handling
Warning: Pump and components are heavy. Failure to properly lift and support
equipment could result in serious physical injury or damage to pumps. Steel toed
shoes must be worn at all times.
Use care when moving pumps. Lifting equipment must be able to adequately support the
pump assembly. Hoist pump using a suitable sling under the motor adapter as shown in
Figure 1. DO NOT lift the pump with the motor installed to the pump assembly.
Consult the motor manufacturer’s Installation, Operation, and
Maintenance manual supplied with your motor for proper handling
procedures for the motor assembly.
Figure 1: Proper Lifting
Transportation and Storage