Xylem handylab LF 11 - Manual (Page 11)

handylab LF 11 Safety
11 ba75365e04 01/2011
2 Safety
This operating manual contains basic instructions that you must follow during
the commissioning, operation and maintenance of the conductivity measur-
ing instrument. Consequently, all responsible personnel must read this oper-
ating manual before working with the measuring system. The operating
manual must always be available within the vicinity of the measuring system.
Target group The measuring instrument was developed for work in the field and in the lab-
oratory.
We assume that, as a result of their professional training and experience, the
operators will know the necessary safety precautions to take when handling
chemicals.
Safety
instructions
The individual chapters of this operating manual use safety instructions such
as the label shown below to indicate various hazards or dangers:
Caution
indicates instructions that must be followed precisely in order to avoid the
possibility of slight injuries or damage to the instrument or the environment.
Further notes
Note
indicates notes that draw your attention to special features.
Note
indicates cross-references to other documents, e.g. operating manuals.
2.1 Authorized use
The authorized use of the measuring instrument consists exclusively of the
measurement of conductivity, salinity, temperature and TDS (total dissolved
solids) in the field and laboratory.
The technical specifications as given in section 1.4 T
ECHNICAL D ATA must be
observed. Only the operation and running of the measuring instrument ac-
cording to the instructions given in this operating manual is authorized.
Any other use is considered to be unauthorized.