Xylem handylab multi 12 - Manual (Page 53)

handylab multi 12 Operation
53 ba75371e03 11/2009
4.6.4 Clearing the memory
With this function, you can delete the stored data records. 500 storage loca-
tions will then be available again.
Note
The Clear memory function only appears when there are data records stored
in the memory. Otherwise, the measuring instrument automatically switches
to the last active measuring mode.
Proceed as follows to clear all data records:
Note
The calibration data remain stored and can be called up.
1 Switch off the measuring instrument.
2 Press the <STO> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display.
4 Confirm the clearing process with <RUN/ENTER>.
Pressing any other key prevents the clearing, the data records
will remain stored.