YSI CR 4200 Thermoreactor - Manual (Page 25)

CR 4200 Operation
25 ba76121e01 09/2012
Socket assignment
2 Connect the thermoreactor to the PC or printer. (Cable see
chapter 9 A
CCESSORIES /O PTIONS ). To do so:
 plug the reference plug (unmarked) in the "Ref" socket (1).
 plug the signal plug (marked by a red ring) in the socket (2).
3 Start the terminal program on the PC.
4 Set the following transmission data in the terminal program:
Baud rate 4800
Handshake none
Parity none
Data bits 8
Stop bits 1
Record none
5 Start the data transmission with g.
After the transmission is finished the test report is deleted in
the thermoreactor.
1 Ref
2 TxD