5 top hat rail mounting, Top hat rail mounting -25, Section 3.5.5) – YSI IQ S ENSOR N ET System 182 User Manual
Page 39
System 182
Installation
3 - 25
ba76022e01
12/2011
3.5.5
Top hat rail mounting
Materials required
THS/IQ kit for top hat rail mounting (see chapter 11 A
Tools
Phillips screwdriver.
Mounting the Universal
Transmitter on a top hat
rail
Fig. 3-21 Mounting the Universal Transmitter on a top hat rail
1
Screw the clamping assembly (pos. 1 in Fig. 3-21) onto the
back of the Universal Transmitter with the two plastic tapping
screws (pos. 2).
2
Attach the Universal Transmitter onto the top hat rail from
above using the clamping assembly and press against the rail
until the clamping assembly clicks into place. The Universal
Transmitter can be moved sideways afterwards.
3
To unhook the Universal Transmitter, press it downward and
pull it forward at the bottom.
For stack m
ou
ntin
g re
mo
ve la
bel
an
d in
sta
ll co
ntact ca
rrier
1
2