YSI IQ S ENSOR N ET System 182 - Manual (Page 91)

System 182 Outputs
6 - 1 ba76022e01 12/2011
6 Outputs
6.1 Outputs of the IQ S ENSOR N ET
The IQ S ENSOR N ET Universal Transmitter has three relays outputs
and two current outputs.
Functions for relay
outputs
 System monitoring
 Sensor monitoring
 Limit indicator
 Frequency controller
 Pulse-width output

Sensor controlled
 Cleaning
 Manual control
Relay outputs can be configured as opener or closer.
Functions for current
outputs
 Recorder
 PID controller
 Fixed current value
Note
You can view the current states of the relay and current outputs in the
measured value and status display (see section 4.2).
Valve outputs
(MIQ/CHV PLUS)
The MIQ/CHV PLUS valve module is administrated by the system as a
valve output (designation, MIQ/CHV PLUS V1). The relevant setting
tables are available via the SETTINGS menu.
Note
The installation and settings of the valve module are described in the
operating manual of the MIQ/CHV PLUS.