YSI IQ SensorNet DIQ/CR3 User Manual
Page 45
Advertising
MIQ/CR3; DIQ/CR3
Settings
4 - 31
ba76032e01
01/2012
I -> OFL/UFL
Error
Current values outside
the range between Start
value and End value are
considerd as errors. The
current output reacts as
specified under Behavior
at error (see below).
Limitation
The current at the output
is limited to the Start
value or End value.
Behavior at error
Fixed current
value
In case of system errors
and sensor errors, and in
case of measured values
outside the range
between Start value and
End value, the current
output supplies the
specified fixed current
value.
Possible values:
0 ... 21 mA.
Unchanged
The current at the output
remains unchanged.
Advertising
This manual is related to the following products: