YSI ProODO - Manual (Page 18)

26 27
Folder: will allow you to view data from one particular folder or all folders.
Highlight Folder, press enter, and select the file you wish to view data from or
select All Folders to view data from all folders.
Begin and End will allow you to view data that was collected between two dates.
Highlight Begin and/or End, press enter, and use the numeric entry screen to
select the dates you wish to view.
After making your selections in the Data Filter,
highlight Show Data and press enter. The data
will have date and time stamps. You will likely
have to scroll up and down and side to side
using the arrow keys to completely view the
data file.
sIte lIst
To modify the Site List, press File , highlight
Site List, and press enter. Enter new site names
or edit existing sites with the alpha/numeric
entry screen. Site lists can also be created and
edited on your PC with Data Manager and then
downloaded to the instrument.
folder
To modify the Folder List, press File , highlight Folder List, and press enter.
Enter new Folder names or edit existing folders with the alpha/numeric entry
screen.
delete data
Press File , highlight Delete Data, and press enter. Enter the criteria for the
data you wish to delete in the Delete Data Filter, then highlight Delete Data and
press enter.
D A T A M A N A G E R
D E S K T O P S O F T WA R E
Data Manager is provided with the purchase of a ProODO Instrument. Data
Manager is a powerful Windows® based software that will allow you to easily
manage logged data, set up instruments, and conduct real time studies.
Data Manager needs to be installed on a PC before use. Once the communications
saddle is connected to an instrument and the PC, the Data Manager software will
recognize the attached instruments. Data Manager will identify the connected
instruments by their Unit ID.
From the ‘home’ screen of Data Manager, you can select one of the following
functions: Retrieve Instrument Data, Real Time Instrument Data, Instrument
Configuration, or View Saved File/Data.
usInG the
coMMunIcatIons saddle
WARNING: DO NOT connect the Communications Saddle to
your PC before installing Data Manager. The Communication
Saddle drivers MUST be installed prior to connecting it to your
PC. The drivers will install automatically during the Data
Manager installation. The first time the saddle is connected to
the PC, you may have to walk through a couple of installation
wizards. For detailed instruction, please refer to the Readme file
located on the CD that was included with your instrument.
u