Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 27)

21 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
When using transparent terminal mode you must press the <Enter> key after each command or message
you wish to send. Press ESC then Enter to exit the modem terminal session and return to the communication
menu.
Option 9
The SDI-12 terminal mode allows direct access to instruments connected to the SDI-12 interface. This is
useful when a manual check or changes need to be made, such as address changes, scale factors etc.
Knowledge of SDI-12 commands is required to make best use of this feature.
> SDI-12 Terminal mode active. Press <ESC Enter> to exit
This menu option will only appear if one or more sensors have a source set to 15 (SDI-12).