Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 46)

iRIS Datalogger User Guide V1.50
40 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
5.2.5 Primary LCD Display Screens
Log In Screen (Level 0, when not logged in)
The Log-In screen is a special screen that is allocated level 0. It is used to enter a PIN number and then
enable access to restricted screens. It is reached by pressing the Alt and Enter keys simultaneously from
any of the four System Status screens when the unit is not logged in.
Once the PIN number matches that programmed into the device and the <Enter> key is pressed, the user
will be logged in and returned to the top-level Welcome (System Status 1) screen. Successful login will also
remove the padlock icon from the top of the display.
System Status 1 Screen (Level 1)
The System Status 1 screen is the default screen shown at system power up, hence its designation as
display level 1. Useful information shown on this screen includes the site name, serial number and the
current time and date.
System Status 2 Screen (Level 1)
The System Status 2 screen is always available, no matter what level of access has been selected. The
information shown on this screen includes the firmware (F) and software (V) version numbers, internal
battery voltage, supply voltage and internal temperature.
System Status 3 Screen (Level 1)
The System Status 3 screen is always available, no matter what level of access has been selected. The
information shown on this screen includes the voltage being measured at the AI1 – AI4 terminals in volts.
These values are useful for checking input signals and also for the calibration process.
The iRIS 320 uses millivolts for its analog inputs, so the display will be slightly different from
this iRIS 350 example which is displayed in volts.
My Site Name
Ser No: AG4-0001
10:55:37
12 Jun 2009
- Unused
+ Move across to System Status 2 screen
Enter Move down to main menu screen
Alt Enter Log in (If PIN code <> 0), otherwise unused
LOG IN
Pin No. 0000 +/- Increment/decrement PIN number
Enter Multiply PIN number by 10 or accept
PIN number as displayed. Moves back
to System Status 1 screen
Vers: F2.50/S1.50
Battery: 12.57V
Supply: 23.78V
Temp: 21.6C - Move back to System Status 1 screen
+ Move forward to System Status 3 screen
Enter Move down to Main Menu screen
Alt Enter Log in (If PIN code <> 0), otherwise unused
AI1: 1.7541 V
AI2: 0.6821 V
AI3: 1.2390 V
AI4: 0.0006 V
- Move back to System Status 2 screen
+ Move forward to System Status 4 screen otherwise unused.
Enter Move down to Main Menu screen
Alt Enter Log in (If PIN code <> 0), otherwise unused