Xylem Expert 3400 - Manual (Page 11)

11
Manual
Manual Expert 1400/3400 GB 0704
MJK Automation A/S
Byageren 7
DK-2850 Naerum
Denmark
Tel.: +45 45 56 06 56
Fax: +45 45 56 06 46
[email protected]
www.mjk.com
Please note the following installation instructions:
1. Follow the installation and safety instructions contained
in the Operation Instructions.
2. Install according to the manufacturer’s instructions
and other valid standards and guidelines.
3. Do not operate the sensor outside the specified electrical,
thermal and mechanical parameters.
4. Install the device only in media for which the wetted
materials have sufficient durability.
5. Expert transmitter type 1400/3400 hydrostatics level
transmitter may not be used in explosive areas without
use of correct Isolator or Zener Barrier.
6. The approved Expert Level Transmitter type
1400/3400 does not need to be separately connected
with, structural parts or piping which are connected to
the equipotential bonding system.
7. The ambient temperature range of the Expert Level
Transmitter type 1400/3400 (-20 °C< Ta<+40 °C.)
Be aware about the environment on the installation site.
Use necessary protection equipment and follow all
safety regulations.