Xylem inoLab 7110 WASTEWATER pH METER User Manual
Page 35
Advertising
pH 7110
Reset
ba75925e02
12/2011
35
Measurement and system settings that can be reset
The following settings are reset to the delivery condition (default):
• Measurement settings
• System settings
• Calibration data
Recalibrate after performing a reset.
Measurement settings
Default
Display during calibration (bUFF )
pH (nominal buffer value)
Unit of the value for the slope (SLO ) mV/pH
Unit of the value for the zero point
(ASY )
mV
Measured value resolution (pH rES) 0.000
Measured value resolution (U rES)
0.0
Unit of the measured temperature
value (Unit )
°C
Calibration interval (Int.C )
7 d
System settings
Default
Switch-off interval (t.Off )
1 h
Advertising