Xylem WTS - Manual (Page 5)

Operating instructions
WTS 102/3-en 3
1. General
1.1 Foreword
This product complies with the safety requirements of EC Machinery Directive 2006/42/EC.
The staff employed on installation, operation, inspection and maintenance must be
able to prove that they know about the relevant accident prevention regulations and
that they are suitably qualified for this work. If staff do not have the relevant
knowledge, they should be provided with suitable instruction.
The operating safety of the pumps or units (i.e. pump plus motor) supplied is only guaranteed if
these are used in accordance with the provisions given in the Confirmation of Order and/or Point 4
in „Installation and Operation“.
The operator is responsible for following the instructions and complying with the safety
requirements given in these Operating Instructions.
Smooth operation of the pump or pump unit can only be achieved if installation and maintenance
are carried out carefully in accordance with the rules generally applied in the field of engineering
and electrical engineering.
If not all the information can be found in these Operating Instructions, please contact us.
The manufacturer takes no responsibility for the pump or pump unit if the Operating Instructions
are not followed.
These Operating Instructions should be kept in a safe place for future use.
If this pump or pump unit is handed on to any third party, it is essential that these Operating
Instructions and the operating conditions and working limits given in the Confirmation of Order
are also passed on in full.
These Operating Instructions do not take into account all design details and variants nor all the
possible chance occurrences and events which might happen during installation, operation and
maintenance.
Alterations or changes to the machine are only permitted by agreement with the manufacturer.
Original spare parts and accessories authorised by the manufacturer should be used for greater
safety. We bear no responsibility for the consequences of using other parts.
We retain all copyright in these Operating Instructions; they are intended only for personal use by
the owner of the pump or the pump unit. The Operating Instructions contain technical instructions
and drawings which may not, as a whole or in part, be reproduced, distributed or used in any
unauthorised way for competitive purposes or passed on to others.
1.2 Guarantee
The guarantee is given in accordance with our Conditions of Delivery and/or the confirmation of
order.
Repair work during the guarantee period may only be carried out by us, or subject to our written
approval. Otherwise the guarantee ceases to apply.
Longer-term guarantees basically only cover correct handling and use of the specified material.
The guarantee shall not cover natural wear and tear and all parts subject to wear, such as
impellers, shaft sealings, shafts, shaft sleeves, bearings, wear rings etc., or damage caused by
transport or improper handling.