Extron Electronics DMP 128 User Guide - Manual (Page 141)

command and response tables
Basic sis commands
command ascii command
(host to device)
urL Encoded
(web)
response
(device to host)
Information requests
Firmware Version Q Q X1!]
Firmware and build version *Q *Q X1!]
Kernel firmware and build **Q **Q X1!]
Verbose version info 0Q 0Q Sum of 2Q-3Q-4Q ]
Firmware version 1Q 1Q X1!]
Bootstrap Version 2Q 2Q X1!]
Factory Firmware Version 3Q 3Q X1! plus web ver.-desc-UL
date/time ]
Updated firmware version 4Q 4Q X1!
plus web ver.-desc-UL
date/time ]
notE: An asterisk (*) after the version number indicates the currently running version. Question marks (?.??) indicate that
only factory firmware is loaded. A caret (^) indicates the firmware version that should be running, but a Mode 1 reset
was executed and the default factory firmware is running. An exclamation point (!) indicates corrupted firmware.
Query part number N N DMP 128: 60-1211-01
DMP 128 AT: 60-1211-10
DMP 128 C: 60-1178-01
DMP 128 C AT: 60-1178-10
DMP 128 C P: 60-1179-01
DMP 128 C P AT: 60-1179-
10
Query model name I I V00x00•A12x08]
Query model name 1I 1I DMP •128• ]
DMP •128•AT ]
DMP •128•C ]
DMP •128•C•AT ]
DMP •128•C•P ]
DMP •128•C•P•AT ]
Query model description 2I 2I Digital•Matrix•Processor ]
Query system memory
usage 3I 3I #Bytes used out of
#KBytes
]
Query user-memory usage 4I 4I #Bytes used out of
#KBytes
]
notE: X1! = Version number Firmware version number to second decimal place ( x.xx)
Version and Build number adds four digits ( x.xx.xxxx)
to the Version number
2I response changes depending on the model number queried.
DMP 128 • SIS Programming and Control 135